Eliminator Bollard, 6" I.D. Schedule 40 Steel Pipe, Internally Locking Removable Embedded Mounting System, TGIC Polyester Powder Coat, Optional Stainless Steel Finish on the Flange and Hinged Hole Cover.
ELBR-6-LRE-P-SS-FRT-IH-HHC-SS
Eliminator Bollard, 6" I.D. Schedule 40 Steel Pipe, Internally Locking Removable Embedded Mounting System, TGIC Polyester Powder Coat, Optional Stainless Steel Finish on the Flange and Hinged Hole Cover (Hot-Dipped Galvanized is the standard finish for the flange and optional hole cover), Removable Flat Cap, Optional Internal Lifting Handle, Optional Hinged Hole Cover.
This bollard is photographed in an uninstalled state. When installed, the sleeve ("A") is embedded so that the top surface of the round flange welded to the top of the sleeve is flush with grade to eliminate the tripping hazard. The Eliminator Bollard then slips into this sleeve and locks into place via a proprietary internal cam lock driven locking mechanism that is actuated by a keyed cam lock cylinder near the top of the bollard. The sleeve on this bollard is also outfitted with an optional hinged, flip up hole cover and set screw so that the hole in the sleeve can be easily covered when the bollard is removed.
Finally, this bollard features an optional removable cap with optional internal lifting handle to aid in lifting the bollard in and out of the sleeve.
.jpg)
This photograph shows the optional internal lifting handle ("A") located near the top of the bollard and used to aid in the lifting of the bollard in and out of its sleeve. It also shows the internal portion of the cam lock cylinder used to actuate the locking device at the bottom of the bollard via an internal rod or cable that runs from the lock cylinder down to the locking mechanism.
This photo shows the embedment sleeve in an uninstalled state.
When installed, this embedment sleeve is embedded so that the top of the round flange welded to the top of the embedment sleeve is flush with grade to eliminate the tripping hazard. This embedment sleeve is outfitted with an optional hinged hole cover that features an internal hinge and a countersunk securing set screw making the hole cover completely flush with the top of the round flange when in the closed position to eliminate the tripping hazard.
This embedment sleeve also features the flange and hinged locking hole cover in an optional stainless steel finish (hot-dipped galvanized is the standard finish).
 |
Bollards are the ideal way to protect buildings, windows, loading docks, equipment and other items, and are also popular for fully or partially blocking access to specified areas. Creative Pipe, Inc. is a leading manufacturer of both industrial and decorative bollards and offers a large line of standard bollards. We also have the flexibility and manufacturing capability to fulfill our customers’ needs for custom bollards as we have done for numerous military bases since 9-11.
Standard bollard height is 36”. Other heights are also available.
Cam lock driven internal locking mechanism.
STANDARD MATERIAL
Schedule 40 round steel pipe (ELBR) or structural and mechanical square steel tubing (ELBSQ ä). Designate “ELBR” or “ELBSQ” for round pipe or square tubing respectively.
STANDARD SIZES
4” I.D. (.237 wall) Schedule 40 steel pipe; 6” I.D. (.280 wall) Schedule 40 steel pipe; 8” I.D. (.322 wall) Schedule 40 steel pipe; or 4”x4” (.250 wall) structural and mechanical square steel tubing (other diameters and sizes are also available). Designate “-4”, “-6”, “-8”, or “-44” respectively after the model number for desired size.
SIDEWALL OPTIONS
Plain; laser cut steel bands; metallic bands; or inset reveals. Please designate “-LB”, “-MB”, or “-RB” after the size designation for a bollard with optional laser cut steel bands, metallic steel bands, or inset reveals respectively. NOTE: SIDEWALL OPTIONS ARE NOT MUTUALLY EXCLUSIVE AND CAN BE MIXED AND MATCHED (E.G. A COMBINATION INSET REVEAL WITH LASER CUT STEEL BANDS, MULTIPLE REVEALS, ETC.).
MOUNTING OPTIONS
Removable embedded with Internal Locking Mechanism. Designate “-LRE” after the sidewall designation.
FINISH OPTIONS
Bollard: Hot-dipped galvanized; polyester powder coated; or stainless steel with a #4 satin finish. Designate “-G”, “-P”, or “-SS”, after the mounting designation for a galvanized, polyester powder coated, or stainless steel bollard respectively.
Embedment Sleeve: Hot-Dipped Galvanized
Round Flange and Optional Hole Cover: Hot-Dipped Galvanized or Optional Stainless Steel. Designate “-G” or “-SS” after the bollard finish designation for a hot dipped galvanized or stainless steel flange and optional hole cover (if ordered) respectively.
CAP OPTIONS
Domed cap; oversized domed cap; flat cap; oversized flat cap; custom cap; or capless. Designate “-D”, “-OD”, “-F”, “-OF”, “-CC”, or “-CL” after the finish designation for a domed cap, oversized domed cap, flat cap, oversized flat cap, custom cap, or capless bollard respectively. NOTE: ALL CAPS CAN BE MADE TO BE REMOVABLE.
EYELET OPTIONS
Available with zero, one, two, three, or four optional eyelets for attaching cable or chain. Designate “-1”, “-2”, “-3”, or “-4” after the finish designation for bollards with one, two, three, or four optional eyelets. NOTE: NO DESIGNATION IS NECESSARY FOR BOLLARDS WITHOUT EYELETS.
OPTIONS
Internal lifting handle; internally hinged, flip up hole cover with countersunk set screw. Designate “-IH” for the optional internal lifting handle and “-HHC” for the optional hole cover.
|
Similar
Products
|
|
 |
Creative
Bollards-CBRTM and CBSQTM Series
|
 |
Bollards - Recycled Plastic Construction |
 |
Bollards-Light Rail Models, CBR-LR Series |
 |
Faux Wood Bollards, Model FWB |
-01.jpg) |
The I-Beam Bollard - Model IBB |