Lightning Bolt, LR Series, Racks: Patented D391,902 & D391,903®

The exciting, patented Lightning BoltT (LR Series) Bicycle Racks by Creative Pipe Inc. were designed to solve many of the problems inherent to bicycle racks on the market today.

This photograph demonstrates how the LR Series rack provides contact with the bikes at 3 points and how the rack enables the cyclist to lock both the front tire and frame to the rack using the popular "U" lock.


LR-P-2-SM-P
Perpendicular  LR Rack, 2 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish.

LR-P-2-SM-P
Perpendicular  LR Rack, 2 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish.

LR-P-3-SM-P
Perpendicular  LR Rack, 3 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish.


LR-XP-6-SM-P
Double-Sided Perpendicular  LR Rack, 6 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish.

LR-D-3-SM-P
Diagonal LR Rack, 3 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish.  Note how the diagonal configuration of this rack saves space from front to back.


LR-D-3-SM-P
Diagonal LR Rack, 3 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish.  Note how the diagonal configuration of this rack saves space from front to back.
 

LR-D-3-SM-P
Diagonal LR Rack, 3 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish.  Note how the diagonal configuration of this rack saves space from front to back.

LR-D-4-SM-P
Diagonal LR Rack, 4 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish.  Note how the diagonal configuration of this rack saves space from front to back.

LR-P-5-SM-P
Perpendicular LR Rack, 5 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish. 

LR-P-4-SM-G
Perpendicular LR Rack, 4 Bike Capacity, Surface Mount, Hot Dipped Galvanized Finish.
 
NOTE: These photos show how the LR rack freely stands and can also be used equally well as a portable unit as well as a permanent bike rack stand.

LR-P-4-SM-G
Perpendicular LR Rack, 4 Bike Capacity, Surface Mount, Hot Dipped Galvanized Finish.
 
NOTE: These photos show how the LR rack freely stands and can also be used equally well as a portable unit as well as a permanent bike rack stand.

LR-XP-2-SM-P
Double-Sided Perpendicular  LR Rack, 2 Bike Capacity, Surface Mount, TGIC Polyester Powder Coat Finish.

LR-XP-6-SM-G 
Double-Sided Perpendicular LR Rack, 6 Bike Capacity, Surface Mount, Hot Dipped Galvanized Finish.

LR-XP-8-SM-G 
Double-Sided Perpendicular LR Rack, 8 Bike Capacity, Surface Mount, Hot Dipped Galvanized Finish.

LR-XP-8-SM-G 
Double-Sided Perpendicular LR Rack, 8 Bike Capacity, Surface Mount, Hot Dipped Galvanized Finish.

LR-XP-8-SM-G
Double-Sided Perpendicular LR Rack, 8 Bike Capacity, Surface Mount, Hot Dipped Galvanized Finish.

Tire pocket detail shows how the ramp in the front of the tire pocket aids in guiding the bicycle tire into the pocket and also prevents it from rolling backwards once inserted while the back stop at the rear of the tire pocket prevents the tire from rolling forward.  Gaps below both allow water and debris to drain from the tire pocket.

DISCLAIMER
LIGHTNING BOLT BICYCLE RACKS, MODELS LR-P, LR-D, & LR-XP, ARE PATENTED PRODUCTS AND ARE SOLD EXCLUSIVELY THROUGH CREATIVE PIPE, INC., THE SOLE PATENT OWNER AND SOLE MANUFACTURER OF THESE RACKS. ANY CLAIMS BY ANY CORPORATION, PARTNERSHIP, INDIVIDUAL OR OTHER ENTITY, OTHER THAN CREATIVE PIPE, INC. TO HAVE THE AUTHORITY OR RIGHT TO MANUFACTURE AND SELL THESE PATENTED RACKS ARE FALSE AND IN VIOLATION OF PATENT LAWS AND SHOULD BE REPORTED TO CREATIVE PIPE, INC. IF YOU HAVE ANY QUESTIONS REGARDING THE FABRICATION, MARKETING, AND SELLING OF THESE RACKS, PLEASE CONTACT US.


LR racks are attractive "street furniture"

Low profile design makes the racks virtually invisible when loaded with bikes.

Sleek and aerodynamic design makes racks aesthetically pleasing when empty or partially full.

No moving parts reduces the risk of injury and eliminates mechanical failure.

LR racks support and arrange bikes perfectly

Locking post and integral wheel well provide 3-point support and keep the bikes upright and aligned.

Wheel well eliminates front wheel "flop-over."

Rear and sloped front wheel well wheel stops prevent bikes from extending into aisles and allow parking of bikes on moderate grades.

Spacing of locking posts eliminates handlebar interference.

Run of LR-P Racks:The LR Series racks can bend around curves and how the racks arrange bicycles in an orderly, upright fashion. It also illustrates how the racks virtually disappear when fully loaded with bicycles.


LR-P and LR-XP Racks
This aerial shot demonstrates how orderly the LR Series racks arrange bicycles and keep aisleways clear.

LR racks are designed to promote obvious, intuitive and secure parking and locking

Locking post and integral wheel well provide 3-point support and keep the bikes upright and aligned.

Wheel well eliminates front wheel "flop-over."

Rear and sloped front wheel well wheel stops prevent bikes from extending into aisles and allow parking of bikes on moderate grades.

Spacing of locking posts eliminates handlebar interference.

Run of LR-P Racks: This photograph demonstrates how the LR Series racks can bend around curves and how the racks arrange bicycles in an orderly, upright fashion. It also illustrates how the racks virtually disappear when fully loaded with bicycles.


Single sided LR racks come in both perpendicular and diagonal models to support normal and reduced depth sites and double sided LR racks come in perpendicular models
Perpendicular racks (LR-P) require 6' of depth from the front to the back of the bike (typical of all standard perpendicular racks).

Diagonal racks (LR-D) require 4' of depth from the front to the back of the bike for areas where aisle space is limited.

Double sided perpendicular racks (LR-XP) require 10' of depth to accommodate parking bikes on both sides of the rack.

LR-XP Rack: Double-sided LR-XP rack for areas where the rack is accessible from both sides.

LR racks are optimized for quick and inexpensive installation
Optional couplers allow adjacent racks to share anchor holes and allow runs of arbitrary length to be assembled with reduced installation materials, labor and time.

Beveled optional couplers allow runs of adjacent racks which share common end holes around landscape curves.

Finish Options
Hot-dip galvanized (standard & recommended), polyester powder coat (optional), PFS thermoplastic powder coat (optional and extra).

Material
Extra Heavy .188 wall square tubing with .75" solid bar loops (SAFETY NOTE: PIPE CUTTERS CANNOT CUT THROUGH SQUARE TUBING).

Mounting Options
Free standing or permanent surface mount.


LR-P Racks (Perpendicular LR Series Racks)
Model #
Description
Capacity
Dimensions
LR-P 2
2 Post Bike Rack
2 Bikes
44.5"L x 27.5"H x 25"W
LR-P 3
3 Post Bike Rack
3 Bikes
67"L x 27.5"H x 25"W
LR-P 4
4 Post Bike Rack
4 Bikes
89.5"L x 27.5"H x 25"W
LR-P 5
5 Post Bike Rack
5 Bikes
112"L x 27.5"H x 25"W

LR-XP Racks (Perpendicular Double Sided LR Series Racks)
Model # Description Capacity Dimensions
LR-XP 2 2 Post Bike Rack 2 Bikes 27"L x 27.5"H x 38"W
LR-XP 4 4 Post Bike Rack 4 Bikes 49.5"L x 27.5"H x 38"W
LR-XP 6 6 Post Bike Rack 6 Bikes 72"L x 27.5"H x 38"W
LR-XP 8 8 Post Bike Rack 8 Bikes 94.5"L x 27.5"H x 38"W

LR-D Racks (Diagonal LR Series Racks)

Model #

Description

Capacity

Dimensions

LR-D 2

2 Post Bike Rack

2 Bikes

59.5"L x 27.5"H x 14"W

LR-D 3

3 Post Bike Rack

3 Bikes

89.5"L x 27.5"H x 14"W

LR-D 4

4 Post Bike Rack

4 Bikes

121.5"L x 27.5"H x 14"W


Similar Products
 
MaverRack (MV & MV-XP Series)™
Bicycle Racks: Patented
 

Creative Pipe, Inc.
Copyright © 2011. All Rights Reserved. 
Created by Antigua Web Designs.