Creative Pipe, Inc. - MaverRack (MV and MV-XP Series) Bicycle Racks: Patented

MaverRack (MV and MV-XP Series)™ Bicycle Racks: Patented

MV racks are attractive "street furniture"

MV-P-2-G

Low profile design makes the racks virtually invisible when loaded with bikes.

Sleek and aerodynamic design makes racks aesthetically pleasing when empty or partially full.

No moving parts reduces the risk of injury and eliminates mechanical failure.

MV racks support and arrange bikes perfectly

Locking post and integral wheel well provide 3-point support and keep the bikes upright and aligned.

Wheel well eliminates front wheel "flop-over."

Rear and sloped front wheel well wheel stops prevent bikes from extending into aisles and allow parking of bikes on moderate grades.

Spacing of locking posts eliminates handlebar interference.

MV racks are designed to promote obvious, intuitive and secure parking and locking

Extra stout 3/8" thick laser cut steel plate makes the rack impervious to pipe cutters.

Locking slots overlap the area where the bike's front wheel comes closest to the bike's down tube providing optimal locking of tire and frame using a "U" lock, cable or chain lock.

Slanted locking post allows proper locking of various sized wheels.

Rack allows bikes to park front-wheel-in (standard) or rear-wheel-in with secure locking of both wheel and frame to the locking post.

Single sided MV racks come in both perpendicular and diagonal models to support normal and reduced depth sites and double sided MV racks come in perpendicular models

Perpendicular racks (MV-P) require 6' of depth from the front to the back of the bike (typical of all standard perpendicular racks).

Diagonal racks (MV-D) require 4' of depth from the front to the back of the bike for areas where aisle space is limited.

Double sided perpendicular racks (MV-XP) require 12' of depth to accommodate parking bikes on both sides of the rack.

MV racks are optimized for quick and inexpensive installation

Optional couplers allow adjacent racks to share anchor holes and allow runs of arbitrary length to be assembled with reduced installation materials, labor and time.

Beveled couplers allow runs of adjacent racks which share common end holes around landscape curves.

MV-P Racks (Perpendicular MV Series Racks)

Model #	Description	Capacity	Dimensions
MV-P 2	2 Post Bike Rack	2 Bikes	44.5"L x 27.5"H x 25"W
MV-P 3	3 Post Bike Rack	3 Bikes	67"L x 27.5"H x 25"W
MV-P 4	4 Post Bike Rack	4 Bikes	89.5"L x 27.5"H x 25"W
MV-P 5	5 Post Bike Rack	5 Bikes	112"L x 27.5"H x 25"W

MV-XP Racks (Perpendicular Double Sided MV Series Racks)

Model #	Description	Capacity	Dimensions
MV-XP 2	2 Post Bike Rack	2 Bikes	27"L x 27.5"H x 38"W
MV-XP 4	4 Post Bike Rack	4 Bikes	49"L x 27.5"H x 38"W
MV-XP 6	6 Post Bike Rack	6 Bikes	72"L x 27.5"H x 38"W
MV-XP 8	8 Post Bike Rack	8 Bikes	94"L x 27.5"H x 38"W

MV-D Racks (Diagonal MV Series Racks)

Model #	Description	Capacity	Dimensions
MV-D 2	2 Post Bike Rack	2 Bikes	59.5"L x 27.5"H x 14"W
MV-D 3	3 Post Bike Rack	3 Bikes	89.5"L x 27.5"H x 14"W
MV-D 4	4 Post Bike Rack	4 Bikes	121.5"L x 27.5"H x 14"W

Material
Extra heavy 3/8" thick laser cut steel plate with stout 4" steel channel base runners.

Finish Options
Hot-dip galvanized (standard & recommended), polyester powder coat (optional), thermoplastic powder coat (optional and extra), stainless steel with a #4 satin finish.

Mounting Options
Free standing or permanent surface mount.

The following three different locking slot designs are available

Similar Products
	Lightning Bolt LR Series Bike Racks