ODBB-PS-6-SM-P
Odessa Backed Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coated. 

NOTE: THE PEFORATED SEAT PAN CAN HAVE A PATTERNED PERFORATION AS SHOWN HERE OR CAN HAVE THE STANDARD SQUARE PERFORATION.

ODBB-PS-6-SM-P
Odessa Backed Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coated. 

NOTE: THE PEFORATED SEAT PAN CAN HAVE A PATTERNED PERFORATION AS SHOWN HERE OR CAN HAVE THE STANDARD SQUARE PERFORATION.

ODBB-PS-6-SM-P
Odessa Backed Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coated. 

NOTE: THE PEFORATED SEAT PAN CAN HAVE A PATTERNED PERFORATION AS SHOWN HERE OR CAN HAVE THE STANDARD SQUARE PERFORATION.

ODBB-PS-6-SM-P
Odessa Backed Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coated. 

NOTE: THE PEFORATED SEAT PAN CAN HAVE A PATTERNED PERFORATION AS SHOWN HERE OR CAN HAVE THE STANDARD SQUARE PERFORATION.

END FRAME
Solid Steel Flat Bar

AVAILABLE MODELS
Odessa: ODBB, Odessa bench with a back

SEAT MATERIAL OPTIONS
¼” x 1-1/2” flat bar slats; perforated steel sheet (round or square); solid steel sheet; 5/8” round bar and tube; laser cut steel straps; horizontal laser cut steel sheet; vertical laser cut steel sheet; or customized laser cut or perforated steel sheet. Designate “-FB”, “-PS”, “-SS”, “-RB”, “-LS”, “-HLF”, “-VLF”, “- CLS” or “- CPS” respectively for seating material after the model number. (Note: Customized bench options are not shown on this sheet).

STANDARD SIZES
Standard bench lengths are 2’, 4’, 6’ or 8’. Designate “-2”, “-4”, “-6”, or “-8” after the seat material designation for a 2’, 4’, 6’ or 8’ bench respectively.

MOUNTING OPTIONS
Embedded; surface mounted for bolting to existing concrete; freestanding. Designate “-E”, “-SM”, or “-FS”, after the bench size for an embedded, surface mounted, or freestanding bench respectively .

FINISH OPTIONS
Polyester powder coated; stainless steel with a #4 satin finish. Designate “-P” or “-SS” for powder coated or stainless steel after the mounting option.

ACCESSORIES
Armrests: Designate the number, if any, of intermediate armrests after the finish option.

NOTE: ODESSA BENCHES CAN BE CUSTOM ORDERED WITHOUT ANY ARMRESTS IF THE CUSTOMER DESIRES.

NOTE: LEVELING FEET ARE AVAILABLE ON ALL FREESTANDING BENCHES. DESIGNATE “-LF” AS THE LAST DESIGNATION.

NOTE: PERFORATED SHEET STEEL IS AVAILABLE WITH EITHER ROUND OR SQUARE PERFORATIONS.