Creative Pipe, Inc. - Opus, OPBB and OPBLB Bench

Opus, OPBB and OPBLB Bench

OPBB-HW-8-SM-P
Opus Backed Bench, Hardwood Seat Pan, 8' Length, Surface Mounted, TGIC Polyester Powder Coated.

OPBB-HFB-8-SM-P
Opus Backed Bench, Horizontal Flat Bar Seat Pan, 8' Length, Surface Mounted, TGIC Polyester Powder Coated.

OPBB-HFB-6-SM-P
Opus Backed Bench, Horizontal Flat Bar Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coated.

OPBLB-HFB-8-SM-P
Opus Backless Bench, Horizontal Flat Bar Seat Pan, 8' Length, Surface Mounted, TGIC Polyester Powder Coated.

NEW: Embossed Steel Sheet: Now available as a sidewall option.

END FRAME
1”x 1” solid square stock or cast iron

AVAILABLE MODELS
Opus: OPBB, Opus bench with a back; OPBLB, Backless Opus bench.

SEAT MATERIAL OPTIONS
¼” x 1-1/2” horizontal flat bar slats; ¼” x 1-1/2” vertical flat bar slats; 12 gauge perforated steel sheet (round or square); 12 gauge solid sheet steel; 5/8” tubular round bar; 12 gauge laser cut steel straps, 12 gauge horizontal laser cut steel sheet, 12 gauge vertical laser cut steel sheet, or customized 12 gauge laser cut or perforated steel sheet. Designate “-HFB”, “VFB”, “-PS”, “-SS”, “-RB”, “-LS”, “-HLF”, “-VLF”, “-CLS” or “-CPS” respectively for seating material after the model number. (Note: Customized bench options are not shown on this sheet).

STANDARD SIZES
Standard bench lengths are 2’, 4’, 6’ or 8’. Designate “-2”, “-4”, “-6”, or “-8” after the seat material designation for a 2’, 4’, 6’ or 8’ bench respectively.

MOUNTING OPTIONS
Embedded; surface mounted for bolting to existing concrete; freestanding. Designate “-E”, “-SM”, or “-FS”, after the bench size for an embedded, surface mounted, or freestanding bench respectively .

FINISH OPTIONS
Hot-dipped galvanized; polyester powder coated; thermoplastic powder coated; stainless steel with a #4 satin finish. Designate “-G”, “-P”, “-T”, “-SS” for galvanized, powder coated, or stainless steel after the mounting option.

ACCESSORIES
Armrests: Designate the number, if any, of intermediate armrests after the finish option.

Model #	Dimensions
OPBB 2	24”Lx33.5”Tx26”D
OPBB 4	48”Lx33.5”Tx26”D
OPBB 6	72”Lx33.5”Tx26”D
OPBB 8	98”Lx33.5”Tx26”D

Model #	Dimensions
OPBLB 2	24”Lx18”Tx24”D
OPBLB 4	48”Lx18”Tx24”D
OPBLB 6	72”Lx18”Tx24”D
OPBLB 8	98”Lx18”Tx24”D

NOTE: LEVELING FEET ARE AVAILABLE ON ALL FREESTANDING BENCHES. DESIGNATE “-LF” AS THE LAST DESIGNATION.

NOTE: PERFORATED SHEET STEEL IS AVAILABLE WITH EITHER ROUND OR SQUARE PERFORATIONS.

Similar Products