Creative Pipe, Inc. - Orbis, ORBB and ORBLB Series, Steel Bench

Orbis™, ORBB™ and ORBLB™ Series, Steel Bench

ORBB-PS-6-SM-P-1
Orbis Backed Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coat, 1 intermediate arm.

and

DCT-TF-PS-32-F-P-LDS
Decatur Trash Receptacle, Tilt Forward Design, Perforated Sheet Steel Sidewall, 32 Gallon, Surface Mounted for Bolting to Existing Concrete, Polyester Powder Coated, Low Domed Steel Top

ORBB-PS-6-SM-P-1
Orbis Backed Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coat, 1 intermediate arm.

ORBB-PS-6-SM-P
Orbis Backed Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coat.

Foreground:

ORBB-PS-6-SM-P-1
Orbis Backed Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coat, 1 intermediate arm.

Middle:

DCT-TF-PS-32-F-P-LDS
Decatur Trash Receptacle, Tilt Forward Design, Perforated Sheet Steel Sidewall, 32 Gallon, Surface Mounted for Bolting to Existing Concrete, Polyester Powder Coated, Low Domed Steel Top

Background:

HS 2-F-P
Horseshoe Rack, 2 Bike Capacity, Flanged Surface Mount, TGIC Polyester Powder Coat.

ORBB-PS-6-SM-P
Orbis Backed Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, Powder Coated.

ORBB-RP-8-SM-SS
Orbis Backed Bench, Gray Recycled Plastic Slats, 8' Length, Surface Mounted, Stainless Steel End Frames and Belly Braces.

ORBLB-FB-5-SM-P
Orbis Backless Bench, Flat Bar Seat Pan, 5' Length, Surface Mounted, TGIC Polyester Powder Coated.

ORBLB-PS-6-SM-P
Orbis Backless Bench, Perforated Steel Sheet Seat Pan, 6' Length, Surface Mounted, TGIC Polyester Powder Coated.

ORBB-RP-5-SM-P
Orbis Backed Bench, Recycled Plastic Slats, 5' Length, Surface Mounted, Powder Coated Frames.

ORBLB-J-5-SM-P
Orbis Backless Bench, Jatoba, 5' Length, Surface Mounted, Powder Coated Frames.

NEW: Embossed Steel Sheet: Now available as a sidewall option.

AVAILABLE MODELS
ORBB™, Orbis Bench with a back; ORBLB™ , Backless Orbis Bench.

END FRAME MATERIAL
3”x 1/2 ” solid steel flat bar

SEAT MATERIAL OPTIONS
Flat bar slats; perforated steel sheet (round or square); solid sheet steel; 5/8” solid round bar; laser cut steel straps, horizontal laser cut flat bar, vertical laser cut flat bar, or customized laser cut or perforated steel sheet. Designate “-FB”, “-PS”, “-SS”, “-RB”, “-LS”, “-HLF”, “-VLF”, “-CLS” or “-CPS” respectively for seating material after the model number. (Note: Customized bench options are not shown on this sheet).

STANDARD SIZES
Standard bench lengths are 2’, 4’, 5’, 6’, or 8’. Designate “2”, “-4”, “-5”, “-6”, or “-8” after the seat material designation for a 2, 4’, 5’, 6’, or 8’ bench respectively (NOTE: OTHER LENGTHS ARE AVAILABLE).

MOUNTING OPTIONS
Embedded; surface mounted for bolting to existing concrete; freestanding. Designate “-E”, “-SM”, or “-FS”, after the bench size for an embedded, surface mounted, or freestanding bench respectively.

FINISH OPTIONS
Hot-dipped galvanized; polyester powder coated; thermoplastic powder coated; stainless steel with a #4 satin finish. Designate “-G”, “-P”, “-T”, “-SS” for galvanized, powder coated, or stainless steel after the mounting option.

ACCESSORIES
Armrests: Designate the number, if any, of intermediate armrests after the finish option. Leveling feet (freestanding benches only). Designate “-LF” for optional leveling feet.

Model	Dimensions
ORBB™2	24”Lx34”Tx23.5”D
ORBB™4	48”Lx34”Tx23.5”D
ORBB™5	60”Lx34”Tx23.5”D
ORBB™6	72”Lx35.5”Tx23.5”D
ORBB™8	98”Lx35.5”Tx23.5”D

Model	Dimensions
ORBLB™2	24”Lx18”Tx24”D
ORBLB™4	48”Lx18”Tx24”D
ORBLB™5	60”Lx18”Tx24”D
ORBLB™6	72”Lx18”Tx24”D
ORBLB™8	98”Lx18”Tx24”D

NOTE: LEVELING FEET ARE AVAILABLE ON ALL FREESTANDING BENCHES. DESIGNATE “-LF” AS THE LAST DESIGNATION.

Similar Products